4 Stage Countertop Reverse Osmosis System

This 4 stage counter top reverse osmosis system has the following flow rate: 100 GPD/ 400 litre per day genuine Dow Filmtec membrane @50 psi, 600 LPD @ 100 psi. This equates to approx. 250ml/m (depending on water pressure and temp)

First stage Omnipure CL10PF5 sediment cartridge, second Omnipure CL10RO-T40, third is the membrane and forth stage is Omnipure CL10RO-T40 coconut carbon cartridge.

Dow Filmtec TFC Membrane (standard by which all other membranes are measured) 

OPTIONAL EXTRAS

Plastic cover box- $30.00( Neat white cover box hides all the filters and assemblies)

Plastic cover box and external spout + $50 (covers all the filter with a neat white box, external spout is for the filtered water. Instead of the filtered water be delivered via a loose tube it will exit the spout)

Membrane Flushing Valve + $20 (extends the life of the membrane). Mainly for areas of South Australia and Western Australia where your water supply will be harder.

Dimensions-

35cm long, 17cm wide and 18cm high

Click here for how Countertop systems are connected and operate

No need to wait all day to fill a container with this unit, will produce water at twice the speed of other similar units on the market.

Removes 96 to 98% of Fluoride, for membrane treatment rates click here.

More Information about this system & how to reduce operating costs

Product comes complete, ready for installation.

These countertop systems will fit a standard size aerator thread. A standard sized aerator is 13/16^th (21mm) if the thread on the spout is male or using the supplied adapter if the thread in the spout is female and is 15/16^th (24mm) diameter. If the aerator thread is not standard size these units will not fit.

Substance treatment rates below for TFC reverse osmosis, click here for a full list in PDF.

The minumum ideal operating pressure 50psi (350kpa) with the absolute lowest being 40 psi (280kpa)

This is a low waste unit with maximum hardness of the water to be treated is 450ppm TDS.

Not suitable for un-chlorinated water supplies.

These countertop systems will fit a standard size aerator thread. A standard sized aerator is 13/16^th (22mm) if the thread on the spout is male or using the supplied adapter if the thread in the spout is female and is 15/16^th (24mm) diameter. If the aerator thread is not standard size these units will not fit.

Replacement Filters

Twin pack

Trio pack

Membrane

Please Note that the Optional counter top spout pictured is only available when purchasing the optional neat cover box. The neat cover box with the optional spout  is $50.00. If the coverbox with the spout is not chosen then the water exits the system via a soft white tube.