QMP-300-HP U.S.A. made housing 10" Australian Standards AS3497 with 3/4" BSP threaded ports. This housing is tough with a burst strength of 575psi (4000kpa) and is tested to AS3497 which means it has been tested from 0 to 700kpa and back to 0 kpa 100,000 times without failure, cracking or distortion.
QMP-300-HP U.S.A. made housing 10" Australian Standards AS3497 with 3/4" BSP threaded ports. This housing is tough with a burst strength of 575psi (4000kpa) and is tested to AS3497 which means it has been tested from 0 to 700kpa and back to 0 kpa 100,000 times without failure, cracking or distortion.
Genuine Pentek USA Made Housing. 20"x4.5" With 1" Female Threaded Ports. Includes Housing Spanner
Aqua-Pro 10" (9-3/4") Clear polycarb housing with 3/4" female ports. Clear Polycarb housings are not to be connected to mains water as they have a lower pressure rating than the white housings.
Genuine Pentek USA Made Housing. 10"x4.5" With 1" Female Threaded Ports. Includes Housing Spanner
Standard size membrane housing to suit membrane sizes 1812 (E.G. Filmtek TW30-1812-50)
Includes: NSF listed 1 micron polyspun sediment cartridge, Omnipure OMB934-5M extruded carbon block 5 micron cartridge & Omnipure CL10RO-T40 extreme purity GAC coconut carbon post filter cartridge.
The Omnipure OMB-934-5M is a 10 micron absolute (5 micron nominal) coconut extruded carbon cartridge. Chlorine removal rating at greater than 95% 37,000 litres. Complies to NSF standard 42, pressure drop at 3 litres per minute 2 psi
Bracket suitable for the 3/4" housings including the QMP 3/4" and Aquapro 3/4" housings
Standard 10 inch housing spanner. Suitable for QMP, Pentek and Aqua pro housings (10" x 2.5") standard housings
MB115 mixed bed resin 500grams which is enough to re-fill a re-fillable Di cartridge, thsi is for the 9-3/4" drop in type of cartridge into a housing.
QMP-300-HP U.S.A. made housing 10" Australian Standards AS3497 with 3/4" BSP threaded ports. This housing is tough with a burst strength of 575psi (4000kpa) and is tested to AS3497 which means it has been tested from 0 to 700kpa and back to 0 kpa 100,000 times without failure, cracking or distortion.
