Aqua-Pro 10 inch (9-3/4") housings with 1/4" NPT female threaded ports. Tested to AS3497 and takes a standard size 10 inch (9-3/4") cartridge.
Aqua-Pro 10 inch (9-3/4") housings with 1/4" NPT female threaded ports. Tested to AS3497 and takes a standard size 10 inch (9-3/4") cartridge.
Genuine Pentek USA Made Housing. 20"x4.5" With 1" Female Threaded Ports. Includes Housing Spanner
Genuine Pentek USA Made Housing. 10"x4.5" With 1" Female Threaded Ports. Includes Housing Spanner
Aqua-Pro 10" (9-3/4") Clear polycarb housing with 3/4" female ports. Clear Polycarb housings are not to be connected to mains water as they have a lower pressure rating than the white housings.
QMP-300-HP U.S.A. made housing 10" Australian Standards AS3497 with 1/4" NPT threaded ports. This housing is tough with a burst strength of 575psi (4000kpa) and is tested to AS3497 which means it has been tested from 0 to 700kpa and back to 0 kpa 100
Trio Replacement set for PSI 019B DI RF,PSI 020B DI LW and 020B DI GM
This adapter is for use with braided quick hookup hose fittings, It is 1/2" male, 1/2" female with a 1/4" threaded off take in the side of the fitting
Standard size membrane housing to suit membrane sizes 1812 (E.G. Filmtek TW30-1812-50)
This 350 kpa (50 psi) pressure limiting valve has John Guest 1/4" fittings on each end, the valve has a maximun 2000 kpa in-feed pressure.
Aqua-Pro 10 inch (9-3/4") housings with 1/4" NPT female threaded ports. Tested to AS3497 and takes a standard size 10 inch (9-3/4") cartridge.
