Whole House System WH-002-RF-Silver (un-chlorinated water system for Tanks, Dams and soft water bores), this systems first stage uses a 20 Inch big white housing with a 1, 5 or 20 micron polyspun sediment filter.
|Warranty||5 years warranty|
This system uses a re-fillable carbon cartridge, this system is very cheap to run ,it costs just $49.00 for the 4 litres (2 kg) of silver carbon required to re-fill the carbon cartridge. 3 year warranty Optional Stainless Steel Bracket plus $20.00, 1" AGA Ball valve optional +$20.00 . Optional pressure gauges can either be mounted horizontally($60.00) or vertically($120). Please note that the horizontally gauges are currently half price due to being overstocked.
If you would like to purchase extra cartridges or parts with the system here are the links:
product comes complete, ready for installation.
When a UV is selected we normally supply the unit on 2 single brackets rather than the single twin bracket so the UV can be plumbed after the sediment filter but before the carbon filter because UV sterilisers can give a burnt flavour (when algae is present in the water) to the water first up in the morning, this is easily removed with the carbon filter being after the UV.
How do I perform water tank testing?
Most consumers can attest to the fact that they have one time or another found their bathrooms with blue/green stains. These stains are as a result of dissolved copper in the water. This happens when you have copper pipes in the house. They are usually eroded as a result of the water being acidic and corroding the pipes.
This therefore requires our consumers to conduct tank water testing from time to time. This means that they have to check to acidic level/PH level of the water often to avoid the acidic level of the water in the tank from rising and corroding the copper pipes.
There are several ways in which the consumer can check for the PH level in the water tank and correct it. Our company can offer tank water filters which involve a special stage that contains coral sand and calcite that will help to correct the PH level in your water tank. On the other hand, the consumer can correct the PH level on their own.
They can do this by using burnt lime. They should mix the burn lime in a bucket of water and pr it into their water tank. Once they have done this, they should try and mix the water with a long shovel ensuring that the sediments in the water tank are not disturbed. The water should be left to settle for two days then test the acidic level using a PH test lit. This can be bought at local pet stores.
They should not purchase the test strips from their local chemists because they tend to show inaccurate results. Our company cannot tell you exactly the amount of burnt lime to use for your water tank because the PH levels and water tank volumes vary. Other ways of solving the PH issues include using seashells. They can be put in the tank and the acidic water will instead act on the shells and not the copper pipes.