
60mm Pressure gauge bottom mount 1/4" NPT thread
60mm Pressure gauge bottom mount 1/4" NPT thread
40mm rear entry pressure gauge 0 to 160 psi pressure, 1/8" rear mount thread
40mm rear entry pressure gauge 0-160psi pressure, 1/8" NPT thread.
This pressure gauge is used one systems : 020B-DI-GM, 020PG, 021-4P-GM, 021-4PG and 021-6EX.
Optional extras-
Elbow gauge mount with 1/8" female thread for mounting of gauge. Side port is 1/8" female thread and 1/4" compression fitting for connection of 1/4" john guest style tubing.
1/8"- 1/8" nipples (Suitable to mount the elbow gauge mount to a 1/8" membrane housing).
1/4"-1/8" reducing nipple (Suitable to mount the elbow gauge mount to a 1/4" filter housing).
60mm Pressure gauge bottom mount 1/4" NPT thread
MB115 mixed bed resin 500grams which is enough to re-fill a re-fillable Di cartridge, thsi is for the 9-3/4" drop in type of cartridge into a housing.
Matrikx™ CTO is a workhorse carbon filter. The Matrikx™ cartridges are made from an extruded block of compressed carbon. These cartridges provide very efficient filtration.
Trio Replacement set for PSI 019B DI RF,PSI 020B DI LW and 020B DI GM
Undersink reverse osmosis dual membrane upgrade. Suitable upgrade for many of our undersink reverse osmosis system to increase production
The Omnipure OMB-934-5M is a 10 micron absolute (5 micron nominal) coconut extruded carbon cartridge. Chlorine removal rating at greater than 95% 37,000 litres. Complies to NSF standard 42, pressure drop at 3 litres per minute 2 psi
40mm rear entry pressure gauge 0 to 160 psi pressure, 1/8" rear mount thread