PSI-304P with Matrikx ™ CR1 , 0.5 micron rating for >99.99% chlorine and >99.99% for Cryptosporidium & Giardia cysts.
|Warranty||10 Years Warranty|
PSI-304P Matrikx™ CR1 , 0.5 micron rating for >99.99% chlorine and >99.99% for Cryptosporidium & Giardia cysts, turn this one up as fast as you like as the treatment ratings are up to 9.5 litres per minute for 40,000 litres with good sediment tolerance as well.
This cartridge exceeds the tough NSF rating by nearly double and is Independently tested and certified.
9 ¾ Inch (248mm) Replacement cartridge price with us $40.00 plus post (set) or (replacement cartridge set if ordered with unit $35.00)
What is in the box?
Supplied with QMP-300-HP U.S.A. made housing 10" Australian Standards AS3497 with 1/4" NPT threaded ports. This housing is tough with a burst strength of 575psi (4000kpa) and is tested to AS3497 which means it has been tested from 0 to 700kpa and back to 0 kpa 100,000 times without failure, cracking or distortion.
With these premium systems we supply the 550kpa pressure limiting valve with dual check valves which is a plumbing code requirement, the valve is also Watermark AS1357-2 licence no 02596 as the watermark is also a plumbing code requirement.
We supply the 550kpa PLV with the premium system so the filter system runs faster than other units on the market.
Filter system dimensions: 36cm high, 26cm wide and 14cm deep.
1 x twin wall mounting bracket, powder coated steel with required screws, stainless steel optional.
3 metres of Genuine John Guest tubing NSF certified food grade, 230 psi pressure rated.
2 x Genuine John Guest PI010822S 1/4" tube to 1/4" NPT speed fit fittings.
1 x AGA pressure rated 1/4 turn brass ball valve and watermarked
3 x John Guest locking clips
1 x roll plumbers thread tape
1 x housing spanner to undo housings when required
1 x NSF certified 1 micron polyspun sediment filter cartridge
1 x U.S.A. made Matrikx CR1 carbon cartridge
1 x Instruction manual
1 x mains fitting instructions
Product comes complete, ready for installation.