Categories

TDS METER 3 (with carrying case)

 
TDS 3 Meter  
bulletIdeal for commercial use. Includes a carrying case with belt clip.
bulletHighly efficient and accurate due to its advanced microprocessor technology.
bulletHold Function: saves measurements for convenient reading and recording.
bulletAuto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries.
bulletMeasurement Range: 0-9990ppm. From 0-999ppm, the resolution is in increments of 1ppm. From 1,000 to 9,990ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image.
bulletDisplay: large and easy-to-read LCD screen.
bulletFactory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver.
bulletAlso available in "x10" mode: reads in increments only of 10ppm (0-9990ppm).

 

Ideal for all water purification applications, wastewater regulation, aquaculture, hydroponics, and colloidal silver.

Perfect for both consumer or commercial use.

Carry one in your pocket or toolbox at all times!

 

 SPECIFICATIONS
bulletRange: 0 - 9990ppm (mg/L)
bulletAccuracy: +/- 2%
bulletPower source: 2 x 1.5V button cell batteries (included)
bulletBattery life: over 1,000 hours of continuous use
bulletDimensions: 15.5 x 3.1 x 2.3cm (6.1 x 1.25 x 1 inches)
bulletWeight with case: 76.5g (2.7 oz)
bulletWeight without case: 56.7g (2 oz)

 

 

IN-LINE DUAL TDS METER

 

Dual TDS Meter  
bulletDisplays TDS levels of the feed water and product water with in & out electrode probes.
bulletHighly efficient and accurate due to its advanced microprocessor technology.
bulletAuto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use.
bulletDual Range 0-9,990 ppm (From 0 - 999ppm the resolution is 1ppm. From 1,000 to 9,990ppm, the resolution is 10ppm, indicated by a blinking 'x10' image.)
bulletFactory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver.
bulletComes equipped with John Guest Quick-Connect T-fittings as shown.
bulletInstalls quickly and easily.

Measure the tap water coming in vs. the purified water going out of your system at any time.

Use the meter to determine when the filters need to be changed.

Install the meter for your customers so they'll always know how their system is performing.

 

 SPECIFICATIONS
bullet 
bulletAccuracy: ±2%
bulletCable Length: 24.5" (including sensor)
bulletPower source: 2 x 1.5V button cell batteries (included)
bulletBattery life: over 1,000 hours of continuous use
bulletSize: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.)
bulletWeight: 79.4 g (2.8 oz.)

 

 


Testimonials

  • Just a quick note to say thanks for the great and promt service and for supplying such high-quality products. I'm very impressed how easy it was to plug all components together, and am especially pleased with the good flow rate through the CR1...

    Richard, Perth, WA
  • Hi Stephanie & Peter, Just thought that we'd let you know that we're thrilled to bits with the Twin Under-sink PSI-304 system that you supplied. It arrived yesterday morning, it went in today & the installatiion was an absolute breeze. The fact...

    Tania & John Spencer, .
  • Peter H, Product, at a great price and great service. I had been planning to order 2more cartridges in the next 4 weeks, I arrived home today to find a reminder letter addressed to myself stating that cartridges maybe due for replacementof which...

    Craig M, .
  • I am writing this email to thank you for your great service. As I told Stephanie on the phone last week, I am totally amazed that a small company in Launceston can get an order delivered to me in Hervey Bay the next day. I have a small business...

    Dave Olds, .