Categories

6 Stage Low Waste RO

After extensive testing we are proud to offer you the most advanced Reverse Osmosis system on the market.

Please Click on any of the below Images to see the full Image:

Reverse Osmosis System and TankFlush ValvePressure GaugeTDS 3 MeterDrain Clamp

 

We have developed this system as a result of concerns expressed by customers about the amount of waste water that a Reverse Osmosis system produces.

  • Waste ratio of approximately 0.6 litres of waste water to 1 litre produced.
  • Chloramine cartridge (13,000 litres chloramine, 110,000 litres chlorine)
  • Twin pressure gauges to monitor cartridge condition.
  • Hand Held electronic TDS meter to monitor membrane performance
  • Membrane flushing valve for easy maintenance.
  • Aquatec permeate pump to assist waste recovery.
  • Permeate pump increases membrane performance.
  • Permeate pump reduces TDS creep.
  • Permeate pump increases tank pressure and volume.
  • Permeate pump increases performance in low pressure areas.
  • Include re-mineralizer cartridge which also corrects pH.
  • Produces 200 litres per day @ 40 psi, 500+ litres per day at 90 psi mains pressure.
  • 2 way drain tap allows you to switch waste to drain or divert to alternative uses such as collection container outside to water plants or into a dripper system resulting is zero waste. Includes 5 metres of extra tubing.
  • Reducing the waste ratio is not magic, without the permeate pump it would not work, reducing the waste ratio is hard on the membrane so we also include a 3 year pro-rata warranty on the membrane as well.
  • Stage 1 is a Polyspun 5 micron sediment filter, stage 2 is a Pentek CGAC-10 Chloramine cartridge, stage 3 is a 1 micron sediment filter, stage 4 is a Dow Filmtec TW30-1812-75 TFC membrane, stage 5 is the re-mineralizing cartridge (Omnipure K2548), stage 6 is a Omnipure CL10RO-T40 coconut carbon cartridge.
  • TDS limit applies to this unit, 500 parts per million of total dissolved solids, Adelaide, Perth, Brisbane, Sydney and Melbourne metropolitan waters generally are lower than 500 ppm, this unit is un-suitable for bore water.
  • Will produce water at about the quality and purity of a cool Mountain Stream.
  • Cartridge costs annual change 2 x polyspun, 1 x Pentek CGAC-10 and 1 x CL10RO-T40 $85.00
  • Re-mineralizer will require changing about every 2 years, $38.00

To view more details and buy this 6 stage Reverse Osmosis System, please click here.


Testimonials

  • Just a quick note to say thanks for the great and promt service and for supplying such high-quality products. I'm very impressed how easy it was to plug all components together, and am especially pleased with the good flow rate through the CR1...

    Richard, Perth, WA
  • Hi Stephanie and Peter,   Thank you for the replacements filters in recognition of loyal service.  It is very much appreciated.  We have always highlighted your reverse osmosis water filters when we have sold our other 2 houses where we...

    Jacqui, .
  • I hope this message will find you, Stephanie, your family and all dear people around you in great health, excellent mood and endless happiness! Best Wishes & Kindest Regards,  E Calic | Dandenong, Victoria

    E Calic, Dandenong, Victoria
  • Ordered a reverse osmosis filter 4 stage. Arrived with a broken piece (dammit Australia Post) - Peter express posted a replacement free of charge. Worked like a charm!rnrnThanks again so much!rnrnP.S The water tastes like... water! (better than...

    Moshtaq, Fairfield