Categories

TDS METER 3 (with carrying case)

TDS 3 Meter  
bulletIdeal for commercial use. Includes a carrying case with belt clip.
bulletHighly efficient and accurate due to its advanced microprocessor technology.
bulletHold Function: saves measurements for convenient reading and recording.
bulletAuto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries.
bulletMeasurement Range: 0-9990ppm. From 0-999ppm, the resolution is in increments of 1ppm. From 1,000 to 9,990ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image.
bulletDisplay: large and easy-to-read LCD screen.
bulletFactory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver.
bulletAlso available in "x10" mode: reads in increments only of 10ppm (0-9990ppm).

 

Ideal for all water purification applications, wastewater regulation, aquaculture, hydroponics, and colloidal silver.

Perfect for both consumer or commercial use.

Carry one in your pocket or toolbox at all times!

 

 SPECIFICATIONS
bulletRange: 0 - 9990ppm (mg/L)
bulletAccuracy: +/- 2%
bulletPower source: 2 x 1.5V button cell batteries (included)
bulletBattery life: over 1,000 hours of continuous use
bulletDimensions: 15.5 x 3.1 x 2.3cm (6.1 x 1.25 x 1 inches)
bulletWeight with case: 76.5g (2.7 oz)
bulletWeight without case: 56.7g (2 oz)

 

 

IN-LINE DUEL TDS METER

Dual TDS Meter  
bulletDisplays TDS levels of the feed water and product water with in & out electrode probes.
bulletHighly efficient and accurate due to its advanced microprocessor technology.
bulletAuto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use.
bulletDual Range 0-9,990 ppm (From 0 - 999ppm the resolution is 1ppm. From 1,000 to 9,990ppm, the resolution is 10ppm, indicated by a blinking 'x10' image.)
bulletFactory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver.
bulletComes equipped with John Guest Quick-Connect T-fittings as shown.
bulletInstalls quickly and easily.

Measure the tap water coming in vs. the purified water going out of your system at any time.

Use the meter to determine when the filters need to be changed.

Install the meter for your customers so they'll always know how their system is performing.

 

 SPECIFICATIONS
bullet 
bulletAccuracy: ±2%
bulletCable Length: 24.5" (including sensor)
bulletPower source: 2 x 1.5V button cell batteries (included)
bulletBattery life: over 1,000 hours of continuous use
bulletSize: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.)
bulletWeight: 79.4 g (2.8 oz.)

 

 


Testimonials

  • Hi Stephanie & Peter, Just thought that we'd let you know that we're thrilled to bits with the Twin Under-sink PSI-304 system that you supplied. It arrived yesterday morning, it went in today & the installatiion was an absolute breeze. The fact...

    Tania & John Spencer, .
  • This company is one that EVERYONE should support. They not only dispatch goods quickly, but ordering online is easy (even for old farts like me). I had an issue with one of their diverter valves. Within minutes of my email, they responded and even...

    Lesley, Brisbane
  • Hi Peter, The filter system arrived on Monday, and installed it today. It was very easy to install and works perfectly. We got use to normal unfiltered tap water so when we tried filtered water the difference was huge. The Sydney water was harsh...

    Luke S, .
  • Peter, "Shame faced husband" ;-) & I were incredibly impressed when the new part & replacement filters arrived today. All installed it looks great & husband proof. Thanks so very much! We are thrilled. You can use this as an unsolicited...

    R Golding, .