With Premeate Booster Pump, pH correction, re-minerlizing, (alkalizer), pressure gauges and total dissolved solid electronic monitoring meter. Waste ratio of 0.6 to 1, lowest on the market
|Warranty||10 Years Warranty|
After extensive testing we are proud to offer you the most advanced Reverse Osmosis system on the market.
We have developed this system as a result of concerns expressed by customers about the amount of waste water that a Reverse Osmosis system produces.
All reverse osmosis systems require a minimum pressure of 40 psi (280kpa) with 50 psi (350kpa) or more is ideal. If you are unsure what your pressure is check with your local Council or water authority.
Be aware the permeate pump witt make a clicking sound about every 3 seconds when the tank is filling. It is about a loud as clicking a biro and reduces over time
Main filter unit is 42cm high, 48cm wide and 14cm deep, tank options and sizes are at this page link.
Supplied with QMP-300-HP U.S.A. made housing 10" Australian Standards AS3497 with 1/4" NPT threaded ports. This housing is tough with a burst strength of 575psi (4000kpa) and is tested to AS3497 which means it has been tested from 0 to 700kpa and back to 0 kpa 100,000 times without failure, cracking or distortion.
With these premium systems we supply the Filtermate 600kpa pressure limiting valve with dual check valves which is a plumbing code requirement, the valve is also Watermark AS1357-2 licence no 02596 as the watermark is also a plumbing code requirement.
We supply the 550kpa PLV with the premium system so the filter system runs faster than other units on the market.
product comes complete, ready for installation.