|

4 Stage Reverse Osmosis Under Sink Unit (Standard model) 200 litre per day genuine Dow Filmtec membrane @50 psi, 300 litres @ 87 psi. LOW WASTE 1.25 to 1
Click here to down load a sample of the installation instructions pdf format
All components are Australian Standards and or NSF certified.
Plymouth style quality housings, Certified Australian Standard AS 3497
Removes 92 to 95% of Fluoride, for membrane treatment rates click here.
1 Micron food grade polyspun sediment filter 9 ¾" (248mm) (standard size)
CTO/2 quality carbon cartridge 9 ¾" (248mm) 22,500 litres chlorine rating
Genuine Omnipure CL10RO- high purity carbon post filter.
Genuine Dow Filmtec TFC Membrane (standard by which all other membranes are measured)
Main filter unit size, 42 cm high, 35 cm wide & 14 cm deep.
9 litre stainless steel storage tank (exceeds drinking water guidelines) NSF Certified. If space is an issue we also offer a 4.2 litre or 12 litre tank, click here for tank details.
Installation phone help line if needed open 7 days a week and 14 hours a day
Standard type flow restrictor
Installation choice 1/2" tee olive fitting, 3/4" dishwasher adapter or 1/2" easy fit braided line flick mixer adapter, our systems take the average handyman 1/2 to 1 hour to install
Mains connect systems click here to view how each are installed 
600 kpa pressure limiting valve, touch flo style dedicated faucet
Replacement set of cartridges.(3) $58.00, less 20% if a replacement set is ordered with the unit.
5 year warranty Click here for selection Advice
PSI Systems are Better Than Other Brands, click here to find out why
This Reverse Osmosis system was originally developed to compete directly with the Chinese imported systems.
At first we tried the same components as they use but with better Taiwanese housings and American cartridges, but some of the components during testing failed.
First we up-graded the auto shut off valve to the U.S.A. made Hydromatic valve which has proved to be very reliable as well as the Hydromatic check valve, we then found the Chinese copy of the Jaco fittings to also be of poor quality and subject to blow off so we up-graded them to the genuine Jaco gripper series which never let go, then it was the tubing that we up-graded to the genuine British John Guest tubing which is extremely high quality, next was the Faucet, we purchased some of the non NSF faucets to supply with the system but with between 6 to 11% lead content in the brass the faucet was made from the water had a metallic taste when first used after sitting say overnight so we tossed those faucets in the garbage and purchased NSF no lead faucets to supply with the systems, so in the end we found that we had a system that was reliable but costs more to produce than the Chinese systems.
The PSI-021-4S may not be as cheap as the Chinese systems but we could not sell a system that would have been a problem for our customers as well as being a warranty nightmare for us.
In the end the PSI-021-4S Undersink reverse osmosis system is good quality, is reliable, suits those looking for a budget system without running the risk of buying a system that will give them problems, the price doesn’t match the Chinese systems but we would rather miss a sale than sell something that would fail.
Typical Mineral removal, not all are listed.
|
Calcium
|
93-99%
|
Bromide
|
90-95%
|
|
Sodium
|
92-98%
|
Phosphate
|
95-98%
|
|
Magnesium
|
93-98%
|
Cyanide
|
90-97%
|
|
Potassium
|
92-96%
|
Sulfate
|
96-99%
|
|
Manganese
|
96-98%
|
Thiosulfate
|
96-98%
|
|
Iron
|
96-98%
|
Silicate
|
92-95%
|
|
Aluminium
|
96-98%
|
Silica
|
90-98%
|
|
Copper
|
96-99%
|
Nitrate
|
90-95%
|
|
Nickel
|
96-99%
|
Boron
|
50-70%
|
|
Cadmium
|
93-97%
|
Borate
|
30-50%
|
|
Silver
|
93-96%
|
Fluoride
|
92-95%
|
|
Zinc
|
96-98%
|
Polyphosphate
|
96-98%
|
|
Mercury
|
94-97%
|
Orthophosphate
|
96-98%
|
|
Hardness Ca&Mg
|
93-97%
|
Chromate
|
85-95%
|
|
Radioactivity
|
93-97%
|
Bacteria
|
99+
|
|
Chloride
|
92-98%
|
Lead
|
95-98%
|
|
Ammonium
|
80-90%
|
Arsenic
|
50-90%
|
|
Strontium
|
95-97%
|
Barium
|
94-96%
|
|
Ferrocyanide
|
96-98%
|
Selenium
|
90-95%
|
Chemicals that this system will treat for
Alachlor, Atrazine, Benzene, Bromochloroacetonitrile2, Bromodichloromethane1, Bromoform1, Tetrachloride, Chlorobenzene, Chlorine, Chloroform1, Chlorodibromomethane1, Chloropicrin, 2,4-D, Dibromoacetonitrile2, DBCP, Dichloroacetonitrile2, o-Dichlorobenzene, p-Dichlorobenzene, 1,2-Dichloroethane, Pentachlorophenol, Simazine, Styrene, 1,1,2,2-Tetrachloroethane, Tetrachloroethylene, Toluene, 2,4,5-TP (Silvex), Tribromoacetic Acid, Trichloroacetonitrile2, 1,2,4-Trichlorobenzene, 1,1,1-Trichloroethane, 1,1,2-Trichloroethane, Trichloroethylene, 1,1,1-Trichloro-2-Propanone3, 1Trihalomethanes, m-Xylene, p-Xylene, 1,1-Dichloroethylene, cis-1,2, Dichloroethylene, trans-1,2-Dichloroethylene, 1,1-Dichloro-2-Propanone3, 1,2-Dichloropropane, cis-1,3-Dichloropropylene, Dinoseb, Endrin, Ethylbenzene, EDB, 2Haloacetonitriles (HAN), 3Haloketones (HK), Heptachlor, Heptachlor Epoxide, Hexachlorobutadiene, Hexachlorocyclopentadiene, Lindane, Methoxychlor
|